Tuesday, 2 April 2013

Step-by-step guide to IBM Power Systems firmware update


  • Hardware Management Console can be a desktop or a rack-mounted appliance that manages the servers, and is used for partitioning and as a service tool.
  • A managed system is a single physical server. It can have I/O expansion units, towers, drawers, and storage area network (SAN) resources.
  • HMC communicates to the managed system through the service processor.
  • The service processor is an embedded controller that monitors and controls the entire system and is running the bare metal Linux.
  • The IBM POWER Hypervisor™ is a layer of system firmware that supports virtualization technologies, logical partitioning (LPAR), and dynamic resource movement across multiple operating system environments.
Figure 1.


The flexible service processor (FSP) firmware provides diagnostics, initialization, configuration, run-time error detection, and correction. It is required to periodically update the firmware on the Power Systems server. Keeping the firmware up-to-date can help in attaining the maximum reliability and functionality from your systems.
Firmware releases enable new function and might also contain fixes or enhancements.
Firmware service packs provide fixes and enhancements within a specific release.
This tutorial provides the following information:
  1. Current firmware details
  2. Different kinds of code download and update methods
  3. Steps to obtain the relevant firmware code updates or releases from the IBM FixCentral website
  4. Steps to update the firmware concurrently using DVD media, that is, the fixes that can be deployed on a running system without rebooting partitions or performing an initial program load (IPL) within a specific release
  5. Steps to update the firmware disruptively, that is, update requiring the system IPL within a specific release
  6. Advanced code update options from the Change Licensed Internal Code wizard
  7. Steps to upgrade to recent firmware releases disruptively using the File Transfer Protocol (FTP) method
  8. Steps to upgrade the firmware disruptively through the IBM Service website to a required level
In the following sections, let's go through in detail covering all the topics highlighted above.

Section 1. View system information

We will use the View system information option to get the current system firmware information.
We will be using this information in IBM Fix Central to obtain information on the latest firmware updates or upgrades available for the system and proceed with the firmware update or upgrade to newer release using the instructions described in the following sections.
Select the system under test, click Updates, and then click View system information to check the currently installed, activated, and accepted levels.
Figure 1.1

The following figure shows the currently installed firmware levels on the system.
Figure 1.2

Fields in figure 1.2 are described below:
EC Number
This displays the numerical identifier of the engineering change (EC) that shows the system and GA level. It has the format ofPPNNSSS, where:
  • PP is the two-character package identifier.
  • NN is the two-character name that identifies a set of platforms. This is the model-unique code for the type of system.
  • SSS is the three-character service pack code stream identifier.
LIC Type
This displays the LIC types associated with the selected target.
Machine Type/Model/Serial Number
This displays the corresponding machine type, model number, and serial number.
Installed Level
This displays the LIC level that will be activated and loaded into memory at the next system restart.
Activated Level
This displays the LIC level that is activated and loaded into memory (for example, from a level 5 to level 7).
Accepted Level
This displays the LIC level that was committed. This refers to the updates selected on the system.
This is the backup level of code that you can return to, if necessary. Generally, this is the level of code on the permanent side (p-side).
Unactivated Deferred Level
This displays the latest or highest LIC level that contains unactivated deferred updates. This refers to the updates selected on the system.
A deferred update requires a system restart to activate.
Platform IPL Level
This displays the LIC level on which the hypervisor and partition firmware were last restarted. When concurrent LIC updates are performed, the activated level will change, but the platform IPL level will remain unchanged.
Update Control
This displays the current owner of LIC update control. It can be either HMC or operating system.

Section 2. Different kinds of “Code download and update” methods

Having known the current firmware levels on the system as described in Section 1 and in order to move up to the necessary latest update that is available, we have various firmware update and upgrade methods as mentioned below. Select the one that is appropriate to your requirement.
  • DVD method
    We can get the latest firmware code information from Fix Central. You need to download the code (as described inSection 3). You will be able to download the file in the ISO format. Then, you need to burn it to a DVD media to perform the update/upgrade using the obtained DVD (and this is described in Section 4).

    Section 4 describes the concurrent firmware update procedure. We can also use the DVD method to perform code upgrades (to a new release). This can be used when the HMC cannot access Internet due to firewall.
  • FTP method
    Download the required code levels using bulk FTP from Fix Central to a remote FTP-enabled system (also described inSection 3) Then, perform the code update/upgrade procedures using the FTP method, providing the login credentials and location of the update/upgrade code on your remote FTP-enabled repository system ( as described for firmware upgrade in Section 7.

    Section 7 describes the disruptive upgrade procedure using the FTP method. Similarly, the FTP procedure can also be used for concurrent code updates (within the same release).
  • IBM service website method We can perform the Power Systems firmware update/upgrade through the IBM service website to a required level (as described in Section 8).

    Section 8 describes the code upgrade procedure disruptively using the IBM website. A similar procedure can be used for performing concurrent code updates as well.

    After selecting the required system from the HMC, ensure to select Change Licensed Internal Code in order to perform code updates (any updates within the same release) and select Upgrade Licensed Internal Code in order to perform code upgrades (by installing the different release).

Section 3. Power Systems firmware code location and download from Fix Central

Power Systems firmware fix packs or firmware releases can be obtained from the IBM Fix Central website.
Select the following categories for Power Systems firmware update and choose the appropriate machine type and model of your system to be updated.
As per the example shown in Figure 3.0, the machine type and model used is: 8203-E4A. Select the appropriate machine type of your choice and continue.
Figure 3.0

Example in Figure 3.1 shown below is for the system firmware only. Similarly, you can explore other options too.
Figure 3.1

If users are aware of the specific firmware level, then users can select the necessary option directly. If not, users can also take help from the recommendations that the website can provide about the latest and the best-suited firmware levels. If you need help, select the I need guidance. I am not sure what level of firmware is recommended option as shown in Figure 3.2.
Choose the specific level or get the recommended level as shown below:
Figure 3.2

Figure 3.3

Decide whether your system needs firmware update to the latest fix pack or upgrade to a new release based on the current levels installed on the system as obtained from View system information in the above section.
Figure 3.4

Figure 3.5

As an example, let us continue to get the firmware service pack within the current release, as shown in Figure 3.6.
Figure 3.6

Figure 3.7

Similarly, users can get the upgrade code, that is, newer release using the second option. Note that this will be a disruptive code install, that is, system power recycles.
Download the update code, if you are planning an update within the current release.
Download the upgrade code if you are planning for an upgrade to a newer release itself.
Figure 3.7 lists the latest, recommended, and available updates to your current release. Select the appropriate option and proceed further.
Continue with downloading the ISO file if you want burn it to a DVD to proceed with the firmware update using the DVD media, orget the code to a remote FTP-enabled system to perform update using the FTP method. The firmware update procedure is explained in detail in the following sections.
Figure 3.8

Figure 3.9

Figure 3.10

Section 4. Power Systems firmware concurrent update procedure using the DVD method

You can update the firmware concurrently (that is, the fixes that can be deployed on a running system without rebooting partitions or performing an IPL) within a specific release. Select the Change Licensed Internal Code option for the current release.
Figure 4.0

Figure 4.1

In the Specify LIC Repository section (as shown in Figure 4.2), select the location of the LIC update repository.
Figure 4.2

Figure 4.3

elect the DVD-RAM drive option,where you have the DVD placed and proceed with code update concurrently, as shown in Figure 4.3.
Note: Place the DVD in the HMC's DVD drive (and not in the system's DVD drive).
Figure 4.4

Click OK to proceed further to the subsequent steps to perform code update. It verifies whether the system is ready for code update by performing the health check and if everything fine, we can proceed further.
The following screen captures show the step-by-step procedure to perform concurrent code update.
Figure 4.5

Figure 4.6

Figure 4.7

Figure 4.8

Figure 4.9

Figure 4.10

Section 5. Steps to update the firmware disruptively (that is, update requiring the system IPL within a specific release)

Firmware updates are usually concurrent. Disruptive update service packs are very rare. The procedure to perform disruptive update is quite similar to concurrent update (explained in Section 4) but this process will prompt for system power cycle during the operation.

Section 6. Advanced code update options from Change Licensed Internal Code wizard

We use the Select advanced features option to perform advanced operations, such as Remove and activate and Reject fix.
Remove and activate option
The Remove and activate option brings the system back to the update level that is on the permanent side. You can use this option to back off an update level.
Figure 6.0

Figure 6.1

Figure 6.2

Figure 6.3

Click OK and then Close to remove and activate the permanent side update level.
Figure 6.4

Reject Fix operation:
Boot the system in the Permanent Side mode (from ASMI -> Power/Restart Control -> Power On/Off System, and make sure that the Current firmware boot side option is displayed as Permanent) and only then the Reject Fix option gets enabled and the operation can be performed. This operation copies the currently running level (permanent side) to the temporary side. This can be used to reject a fix that has been applied.
Figure 6.5

Figure 6.6

Figure 6.7

Click OK to start this operation.

Section 7. Upgrade to newer firmware releases disruptively using the FTP method

Installing a release or a disruptive fix pack causes system IPL. All release upgrades are disruptive.
We can obtain the upgrade code, that is, the disruptive fix pack from Fix Central and burn it to a media drive and proceed with the upgrade process, which is quite similar to the concurrent update process explained in the earlier sections (except that this operation is disruptive).
In this section, let us learn how to use the FTP method to upgrade the system using the firmware code stored in a remote repository.
The following screen captures shows the steps to upgrade to newer firmware releases disruptively using the FTP method.
Figure 7.0

Figure 7.1

Figure 7.2

Figure 7.3

Figure 7.4

Figure 7.5

Figure 7.6

Figure 7.7

Figure 7.8

Clicking OK starts the disruptive upgrade. System will be on the applied release level after the upgrade operation completes.

Section 8. Steps to upgrade the firmware disruptively using the IBM service website to the required level

After logging in to the HMC, click System Management > Servers > Target Server on the left pane. Instead, you can also click the Updates icon on the same pane. All the available servers will be displayed in the right pane. In the following figure, the red highlight in the right pane shows the current level installed.
Figure 8.0


Make sure that your target server is in the shutdown mode, and if not, switch off the server.
Now, click the Upgrade Licensed Internal Code to a new release link at the bottom of the page as shown in the following figure.
Figure 8.1

After clicking the link, you will be directed to the web page which will show information about the readiness check. If there is no errors found, you can click OK and proceed further, as shown in the following figure.
Figure 8.2

After clicking OK, you will be directed to the Specify LIC Repository page. Here, you need to select the location of the code. The options shown in the following figure are available.
Figure 8.3

If you are setting a new server configuration, the best practice at this prompt is always to select the IBM service web site option and you need not worry about the need to power off and power on the managed systems in this method.
After selecting the IBM Service web site option, you will have a new web page opened, which will show you the available LIC level details. Here, the best practice is to select the latest available code (that is, the latest available version). Most of the fixes are added by IBM and your Power Systems server will be upgraded to the latest level. Then, select the best as per your requirement, or the latest supported.
Be patient here and follow the prompts to complete the upgrade. The firmware upgrade activity will need time depending on your Internet bandwidth speed. Do not forget to switch on the server, so that the latest firmware gets activated and reflected in the navigation pane, as shown in the following figure.
Figure 8.4

Now you are done with the upgrade. Remember if you select multiple systems, you can upgrade them as well.


1 comment:

  1. really useful stuffs.thanks alot.keep the good work